Most USB-based flash technology integrates a printed circuit board with a metal tip, which is simply soldered on. As a result, the stress point is where the two pieces join. The quality control of some manufacturers does not ensure a proper solder temperature, further weakening the stress point.[77][78] Since many flash drives stick out from computers, they are likely to be bumped repeatedly and may break at the stress point. Most of the time, a break at the stress point tears the joint from the printed circuit board and results in permanent damage. However, some manufacturers produce discreet flash drives that do not stick out, and others use a solid metal uni-body that has no easily discernible stress point. SD cards serve as a good alternative to USB drives since they can be inserted flush.
The memory in flash drives is commonly engineered with multi-level cell (MLC) based memory that is good for around 3,000-5,000 program-erase cycles,[40] but some flash drives have single-level cell (SLC) based memory that is good for around 100,000 writes. There is virtually no limit to the number of reads from such flash memory, so a well-worn USB drive may be write-protected to help ensure the life of individual cells.
Original flash memory designs had very limited estimated lifetimes. The failure mechanism for flash memory cells is analogous to a metal fatigue mode; the device fails by refusing to write new data to specific cells that have been subject to many read-write cycles over the device's lifetime. Premature failure of a "live USB" could be circumvented by using a flash drive with a write-lock switch as a WORM device, identical to a live CD. Originally, this potential failure mode limited the use of "live USB" system to special-purpose applications or temporary tasks, such as:
As of 2011, newer flash memory designs have much higher estimated lifetimes. Several manufacturers are now offering warranties of 5 years or more. Such warranties should make the device more attractive for more applications. By reducing the probability of the device's premature failure, flash memory devices can now be considered for use where a magnetic disk would normally have been required. Flash drives have also experienced an exponential growth in their storage capacity over time (following the Moore's Law growth curve). As of 2013, single-packaged devices with capacities of 1 TB are readily available,[54] and devices with 16 GB capacity are very economical. Storage capacities in this range have traditionally been considered to offer adequate space, because they allow enough space for both the operating system software and some free space for the user's data.
The applications of current data tape cartridges hardly overlap those of flash drives: on tape, cost per gigabyte is very low for large volumes, but the individual drives and media are expensive. Media have a very high capacity and very fast transfer speeds, but store data sequentially and are very slow for random access of data. While disk-based backup is now the primary medium of choice for most companies, tape backup is still popular for taking data off-site for worst-case scenarios and for very large volumes (more than a few hundreds of TB). See LTO tapes.
^ Also known as a thumb drive, pen drive, gig stick, flash stick, jump drive, disk key, disk on key (after the original M-Systems DiskOnKey drive from 2000),[1] flash-drive, memory stick (not to be confused with the Sony Memory Stick), USB key, USB stick or USB memory. For an incomplete list of alternative names, see the list of redirects to this article.
The New York-based Human Rights Foundation collaborated with Forum 280 and USB Memory Direct to launch the "Flash Drives for Freedom" program.[80][81] The program was created in 2016 to smuggle flash drives with American and South Korean movies and television shows, as well as a copy of the Korean Wikipedia, into North Korea to spread pro-Western sentiment.[82][83]
The memory in flash drives is commonly engineered with multi-level cell (MLC) based memory that is good for around 3,000-5,000 program-erase cycles,[40] but some flash drives have single-level cell (SLC) based memory that is good for around 100,000 writes. There is virtually no limit to the number of reads from such flash memory, so a well-worn USB drive may be write-protected to help ensure the life of individual cells.
Many companies make small solid-state digital audio players, essentially producing flash drives with sound output and a simple user interface. Examples include the Creative MuVo, Philips GoGear and the first generation iPod shuffle. Some of these players are true USB flash drives as well as music players; others do not support general-purpose data storage. Other applications requiring storage, such as digital voice or sound recording, can also be combined with flash drive functionality.[57]
Artists have sold or given away USB flash drives, with the first instance believed to be in 2004 when the German punk band Wizo released the Stick EP, only as a USB drive. In addition to five high-bitrate MP3s, it also included a video, pictures, lyrics, and guitar tablature.[58] Subsequently, artists including Nine Inch Nails and Kylie Minogue[59] have released music and promotional material on USB flash drives. The first USB album to be released in the UK was Kiss Does... Rave, a compilation album released by the Kiss Network in April 2007.[60]
With wide deployment(s) of flash drives being used in various environments (secured or otherwise), the issue of data and information security remains important. The use of biometrics and encryption is becoming the norm with the need for increased security for data; on-the-fly encryption systems are particularly useful in this regard, as they can transparently encrypt large amounts of data. In some cases a secure USB drive may use a hardware-based encryption mechanism that uses a hardware module instead of software for strongly encrypting data. IEEE 1667 is an attempt to create a generic authentication platform for USB drives. It is supported in Windows 7 and Windows Vista (Service Pack 2 with a hotfix).[47]
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
