Apple smart products don’t come with USB ports, so you will need a backwards compatible drive that can also plug into lightning devices. This thumbdrive from SanDisk is designed for ease of use with iPhones and iPads, thanks to a curbed plastic connector that fits behind the back of the screen. It has high-speed USB 3.0 transfer speeds and can hold over 7,200 photos or 8,000 songs. It has automatic photo backup and contact transfer to help free up space on your devices without having to deal with the slow upload speeds.
Most USB flash drives do not include a write protection mechanism. This feature, which gradually became less common, consists of a switch on the housing of the drive itself, that prevents the host computer from writing or modifying data on the drive. For example, write protection makes a device suitable for repairing virus-contaminated host computers without the risk of infecting a USB flash drive itself. In contrast to SD cards, write protection on USB flash drives (when available) is connected to the drive circuitry, and is handled by the drive itself instead of the host (on SD cards handling of the write-protection notch is optional).
Most USB-based flash technology integrates a printed circuit board with a metal tip, which is simply soldered on. As a result, the stress point is where the two pieces join. The quality control of some manufacturers does not ensure a proper solder temperature, further weakening the stress point.[77][78] Since many flash drives stick out from computers, they are likely to be bumped repeatedly and may break at the stress point. Most of the time, a break at the stress point tears the joint from the printed circuit board and results in permanent damage. However, some manufacturers produce discreet flash drives that do not stick out, and others use a solid metal uni-body that has no easily discernible stress point. SD cards serve as a good alternative to USB drives since they can be inserted flush.
Anyone who has accidentally left their flash drive in their pants pockets through a laundry cycle will appreciate the durability of this Samsung drive. Its durable metal casing is waterproof, shockproof, magnetproof, and resistant to high temperatures. The drive is housed inside the metal casing, so it won’t break off (and the keyring is made with the same quality casing, again helping your drive live longer). Samsung believes in this drive enough to provide a five-year warranty should anything happen. Durability isn’t its only perk, either. USB 3.0 and NAND technology gives this drive data transfer respectable read speeds of up to 130 MB/s and write speeds over 100 MB/s. It is also backwards compatible with USB 2.0, but expect a drop in transfer speeds.
Its a "branded" flash drive, so all our flash drives have imprint areas or laser etching that will make your logo pop! Whatever your event or program, there is likely a style of USB flash drive with an imprint area that provides just the right surface to make our images stand out. From 1 - 4 color spot to full-color process (try this on the credit card style drives!) your imprint will look fantastic.
Third generation USB flash drives were announced in late 2008 and became available in 2010.[citation needed] Like USB 2.0 before it, USB 3.0 dramatically improved data transfer rates compared to its predecessor. The USB 3.0 interface specified transfer rates up to 5 Gbit/s (625 MB/s), compared to USB 2.0's 480 Mbit/s (60 MB/s).[citation needed] By 2010 the maximum available storage capacity for the devices had reached upwards of 128 GB.[7] USB 3.0 was slow to appear in laptops. As of 2010, the majority of laptop models still contained the 2.0.[23]
USB 2.0 flash drives have a transfer rate of up to 480Mbps, while USB 3.0 flash drives allow for transfer rates 10 times faster — up to 4.8Gbps. However, you can only take advantage of this higher speed if your device has a USB 3.0 port. Although USB 3.0 flash drives and other devices are backwards compatible with USB 2.0 ports, they will only operate at a USB 2.0 rate.
×