When used in the same manner as external rotating drives (hard drives, optical drives, or floppy drives), i.e. in ignorance of their technology, USB drives' failure is more likely to be sudden: while rotating drives can fail instantaneously, they more frequently give some indication (noises, slowness) that they are about to fail, often with enough advance warning that data can be removed before total failure. USB drives give little or no advance warning of failure. Furthermore, when internal wear-leveling is applied to prolong life of the flash drive, once failure of even part of the memory occurs it can be difficult or impossible to use the remainder of the drive, which differs from magnetic media, where bad sectors can be marked permanently not to be used.[74]
Third generation USB flash drives were announced in late 2008 and became available in 2010.[citation needed] Like USB 2.0 before it, USB 3.0 dramatically improved data transfer rates compared to its predecessor. The USB 3.0 interface specified transfer rates up to 5 Gbit/s (625 MB/s), compared to USB 2.0's 480 Mbit/s (60 MB/s).[citation needed] By 2010 the maximum available storage capacity for the devices had reached upwards of 128 GB.[7] USB 3.0 was slow to appear in laptops. As of 2010, the majority of laptop models still contained the 2.0.[23]
A minority of flash drives support biometric fingerprinting to confirm the user's identity. As of mid-2005,[needs update] this was an expensive alternative to standard password protection offered on many new USB flash storage devices. Most fingerprint scanning drives rely upon the host operating system to validate the fingerprint via a software driver, often restricting the drive to Microsoft Windows computers. However, there are USB drives with fingerprint scanners which use controllers that allow access to protected data without any authentication.[70]
In addition to providing reliable storage for information, many of these products come with security software that protects your personal data if you lose your device. The software secures files with 128-bit AES encryption and requires a password to unlock the stored information. It also features a drag-and-drop user interface that simplifies transferring and securing your data.
Quickly transfer files to and from your laptop or desktop using this SanDisk Ultra SDCZ48-064G-A46 USB 3.0 flash drive that features a read speed of up to 80MB/sec. The 64GB capacity offers ample storage space. (Ten times faster than USB 2.0 drives. Write speeds up to 10 times faster than Cruzer USB 2.0 drive.)* *USB 3.0 port required. Based on internal testing; performance may be lower depending upon host device.
Capacity - More so than any other feature, capacity will drive the price of a flash drive up the most. So before you make a purchase, consider how much you’re willing to spend on a flash drive and weigh that against how much capacity you’ll likely need. A flash drive with 16GB can cost you as little as $10, while a 128GB one will run up to $60 or more.
Original flash memory designs had very limited estimated lifetimes. The failure mechanism for flash memory cells is analogous to a metal fatigue mode; the device fails by refusing to write new data to specific cells that have been subject to many read-write cycles over the device's lifetime. Premature failure of a "live USB" could be circumvented by using a flash drive with a write-lock switch as a WORM device, identical to a live CD. Originally, this potential failure mode limited the use of "live USB" system to special-purpose applications or temporary tasks, such as:
Also, HP has introduced a USB floppy drive key, which is an ordinary USB flash drive with additional possilibility for performing floppy drive emulation, allowing its usage for updating system firmware where direct usage of USB flash drives is not supported. Desired mode of operation (either regular USB mass storage device or of floppy drive emulation) is made selectable by a sliding switch on the device's housing.[51][52]
Flash memory combines a number of older technologies, with lower cost, lower power consumption and small size made possible by advances in microprocessor technology. The memory storage was based on earlier EPROM and EEPROM technologies. These had limited capacity, were slow for both reading and writing, required complex high-voltage drive circuitry, and could be re-written only after erasing the entire contents of the chip.
A drawback to the small size of flash drives is that they are easily misplaced or otherwise lost. This is a particular problem if they contain sensitive data (see data security). As a consequence, some manufacturers have added encryption hardware to their drives, although software encryption systems which can be used in conjunction with any mass storage medium will achieve the same result. Most drives can be attached to keychains or lanyards. The USB plug is usually retractable or fitted with a removable protective cap.
“The Samsung BAR is incredibly small and easily portable, measuring just under 2-inches long,” our tester said. He added, “It's also extremely durable: waterproof, shockproof, as well as x-rays and magnets [proof].” The included key ring adds to its portability, according to our reviewer. On the flip side, he called the transfer speeds “decent but mostly unremarkable.” Our tester concluded, “Most of the BAR's problems are due to Samsung releasing a newer, cheaper model, the BAR Plus.”
USB flash drives usually specify their read and write speeds in megabytes per second (MB/s); read speed is usually faster. These speeds are for optimal conditions; real-world speeds are usually slower. In particular, circumstances that often lead to speeds much lower than advertised are transfer (particularly writing) of many small files rather than a few very large ones, and mixed reading and writing to the same device.
As of 2011, newer flash memory designs have much higher estimated lifetimes. Several manufacturers are now offering warranties of 5 years or more. Such warranties should make the device more attractive for more applications. By reducing the probability of the device's premature failure, flash memory devices can now be considered for use where a magnetic disk would normally have been required. Flash drives have also experienced an exponential growth in their storage capacity over time (following the Moore's Law growth curve). As of 2013, single-packaged devices with capacities of 1 TB are readily available,[54] and devices with 16 GB capacity are very economical. Storage capacities in this range have traditionally been considered to offer adequate space, because they allow enough space for both the operating system software and some free space for the user's data.
Flash drives implement the USB mass storage device class so that most modern operating systems can read and write to them without installing device drivers. The flash drives present a simple block-structured logical unit to the host operating system, hiding the individual complex implementation details of the various underlying flash memory devices. The operating system can use any file system or block addressing scheme. Some computers can boot up from flash drives.
The various writable and re-writable forms of CD and DVD are portable storage media supported by the vast majority of computers as of 2008. CD-R, DVD-R, and DVD+R can be written to only once, RW varieties up to about 1,000 erase/write cycles, while modern NAND-based flash drives often last for 500,000 or more erase/write cycles. DVD-RAM discs are the most suitable optical discs for data storage involving much rewriting.
Hardware designers later developed EEPROMs with the erasure region broken up into smaller "fields" that could be erased individually without affecting the others. Altering the contents of a particular memory location involved copying the entire field into an off-chip buffer memory, erasing the field, modifying the data as required in the buffer, and re-writing it into the same field. This required considerable computer support, and PC-based EEPROM flash memory systems often carried their own dedicated microprocessor system. Flash drives are more or less a miniaturized version of this.
Usually, such drives will be custom-stamped with a company's logo, as a form of advertising. The drive may be blank, or preloaded with graphics, documentation, web links, Flash animation or other multimedia, and free or demonstration software. Some preloaded drives are read-only, while others are configured with both read-only and user-writable segments. Such dual-partition drives are more expensive.[61]
Particularly with the advent of USB, external hard disks have become widely available and inexpensive. External hard disk drives currently cost less per gigabyte than flash drives and are available in larger capacities. Some hard drives support alternative and faster interfaces than USB 2.0 (e.g., Thunderbolt, FireWire and eSATA). For consecutive sector writes and reads (for example, from an unfragmented file), most hard drives can provide a much higher sustained data rate than current NAND flash memory, though mechanical latencies seriously impact hard drive performance.
Many types of USB drive, sometimes referred to as a thumb drive, also have handy features like a key chain ring or a small LED flashlight. Some can even transmit your data wirelessly for the ultimate in digital convenience. And as with any fun accessory, there are plenty of novelty versions of flash drives designed to show your personality, display your sense of humor, or broadcast your team loyalty.
