Universal Serial Bus (USB) is a standard that defines both communication protocols and physical connections for data transfer. Using thumb drives based on this standard ensures they work with a broad range of devices, making it simple to show digital pictures on a USB-enabled television, transfer files between Apple and Microsoft computers or use your saved game on a friend's gaming console. These devices also offer plug-and-play compatibility with most operating systems and require no additional software to access the storage they provide.
Motherboard firmware (including BIOS and UEFI) can be updated using USB flash drives. Usually, new firmware image is downloaded and placed onto a FAT16- or FAT32-formatted USB flash drive connected to a system which is to be updated, and path to the new firmware image is selected within the update component of system's firmware.[49] Some motherboard manufacturers are also allowing such updates to be performed without the need for entering system's firmware update component, making it possible to easily recover systems with corrupted firmware.[50]
If you are taking your data to the extreme ends of the Earth and need to go a step above and beyond to keep it safe, the rugged Corsair Flash Survivor Stealth 64-bit is the drive for you. Constructed with aircraft-grade aluminum housing and outfitted with a molded shock damping collar, this drive is meant to survive anything you can throw at it. It can even be submerged in up to 200 meters of water because of the EPDM (ethylene propylene diene monomer rubber) waterproof seal. With speeds at around 85 MB/s, this isn’t the fastest drive around, but its ruggedness is unparalleled.
We offer the most reliable and consistently top performing customizable, no minimum USB flash drives out there. With more than 25 styles and over 550 different looks, our drives are available in 4GB, 8GB, 16GB, 32GB, 64GB, and 128GB capacities–with most available in USB 3.0 from 16GB and up. We’re so confident in the quality of our drives, each one includes a lifetime warranty.
A flash drive consists of a small printed circuit board carrying the circuit elements and a USB connector, insulated electrically and protected inside a plastic, metal, or rubberized case, which can be carried in a pocket or on a key chain, for example. The USB connector may be protected by a removable cap or by retracting into the body of the drive, although it is not likely to be damaged if unprotected. Most flash drives use a standard type-A USB connection allowing connection with a port on a personal computer, but drives for other interfaces also exist. USB flash drives draw power from the computer via the USB connection. Some devices combine the functionality of a portable media player with USB flash storage; they require a battery only when used to play music on the go.
The U3 company works with drive makers (parent company SanDisk as well as others) to deliver custom versions of applications designed for Microsoft Windows from a special flash drive; U3-compatible devices are designed to autoload a menu when plugged into a computer running Windows. Applications must be modified for the U3 platform not to leave any data on the host machine. U3 also provides a software framework for independent software vendors interested in their platform.
Flash drives implement the USB mass storage device class so that most modern operating systems can read and write to them without installing device drivers. The flash drives present a simple block-structured logical unit to the host operating system, hiding the individual complex implementation details of the various underlying flash memory devices. The operating system can use any file system or block addressing scheme. Some computers can boot up from flash drives.
USB flash drives are often used for storage, data back-up and transfer of computer files. Compared with floppy disks or CDs, they are smaller, faster, have significantly more capacity, and are more durable due to a lack of moving parts. Additionally, they are immune to electromagnetic interference (unlike floppy disks), and are unharmed by surface scratches (unlike CDs). Until about 2005, most desktop and laptop computers were supplied with floppy disk drives in addition to USB ports, but floppy disk drives became obsolete after widespread adoption of USB ports and the larger USB drive capacity compared to the 1.44 MB 3.5-inch floppy disk.
The entire case of the Kingston flash drive slides into the USB port, making it a tremendously compact and sleek option for data storage. The hole in the back allows it to be attached to a keychain, which ensures you won’t forget it at home when you need it at work. Pros: Affordable, sleek design, good option for travel. Cons: Some found that the small casing made it more delicate Image Courtesy of Amazon
Audio tape cassettes and high-capacity floppy disks (e.g., Imation SuperDisk), and other forms of drives with removable magnetic media, such as the Iomega Zip and Jaz drives, are now largely obsolete and rarely used. There are products in today's market that will emulate these legacy drives for both tape and disk (SCSI1/SCSI2, SASI, Magneto optic, Ricoh ZIP, Jaz, IBM3590/ Fujitsu 3490E and Bernoulli for example) in state-of-the-art Compact Flash storage devices – CF2SCSI.
In the arcade game In the Groove and more commonly In The Groove 2, flash drives are used to transfer high scores, screenshots, dance edits, and combos throughout sessions. As of software revision 21 (R21), players can also store custom songs and play them on any machine on which this feature is enabled. While use of flash drives is common, the drive must be Linux compatible.
Floppy disk hardware emulators exist which effectively utilize the internal connections and physical attributes of a floppy disk drive to utilize a device where a USB flash drive emulates the storage space of a floppy disk in a solid state form, and can be divided into a number of individual virtual floppy disk images using individual data channels.
There are 2 ways; which one depends on how many USB ports you have. If you have 2, then put both flash drives in, open up in the file browser and move the information between the two drives in the file browser. If there is only one socket, put the first flash drive in and place the files to be transferred on the computer, then unlpug and put the next drive in. If you have no USB ports, you will need an adapter (Mac). You could also transfer files to the Cloud, then download them onto the other flash drive.
The memory in flash drives is commonly engineered with multi-level cell (MLC) based memory that is good for around 3,000-5,000 program-erase cycles,[40] but some flash drives have single-level cell (SLC) based memory that is good for around 100,000 writes. There is virtually no limit to the number of reads from such flash memory, so a well-worn USB drive may be write-protected to help ensure the life of individual cells.
Some manufacturers deploy physical authentication tokens in the form of a flash drive. These are used to control access to a sensitive system by containing encryption keys or, more commonly, communicating with security software on the target machine. The system is designed so the target machine will not operate except when the flash drive device is plugged into it. Some of these "PC lock" devices also function as normal flash drives when plugged into other machines.
USB 2.0 flash drives have a transfer rate of up to 480Mbps, while USB 3.0 flash drives allow for transfer rates 10 times faster — up to 4.8Gbps. However, you can only take advantage of this higher speed if your device has a USB 3.0 port. Although USB 3.0 flash drives and other devices are backwards compatible with USB 2.0 ports, they will only operate at a USB 2.0 rate.