This depends on the programs. Most programs will situate their contents in multiple locations, so if it's on your computer, you'll need to know where all of a program is stored. It can be easier to download the program from scratch again as it brings in all of the needed content for you. If you are trying to transfer from a computer, at the very least be sure to capture the EXE, Application and Java files; however, there are usually many other files too. Also, the programs will differ between operating systems (for example, EXE is Windows, while .app is Mac). End answer: it can be done but it's easier if you can download the program afresh.
Flash drives implement the USB mass storage device class so that most modern operating systems can read and write to them without installing device drivers. The flash drives present a simple block-structured logical unit to the host operating system, hiding the individual complex implementation details of the various underlying flash memory devices. The operating system can use any file system or block addressing scheme. Some computers can boot up from flash drives.
If you are taking your data to the extreme ends of the Earth and need to go a step above and beyond to keep it safe, the rugged Corsair Flash Survivor Stealth 64-bit is the drive for you. Constructed with aircraft-grade aluminum housing and outfitted with a molded shock damping collar, this drive is meant to survive anything you can throw at it. It can even be submerged in up to 200 meters of water because of the EPDM (ethylene propylene diene monomer rubber) waterproof seal. With speeds at around 85 MB/s, this isn’t the fastest drive around, but its ruggedness is unparalleled.
The world is becoming increasingly virtual, which means fewer people print documents unnecessarily and opt to share them electronically instead. Rather than spend time and resources on information packs, why not use custom USB flash drives to provide your audience with the information they need? Our wholesale flash drives can be customized with your logo or brand name for a personal touch they can remember you by.
The development of high-speed serial data interfaces such as USB made semiconductor memory systems with serially accessed storage viable, and the simultaneous development of small, high-speed, low-power microprocessor systems allowed this to be incorporated into extremely compact systems. Serial access requires far fewer electrical connections for the memory chips than does parallel access, which has simplified the manufacture of multi-gigabyte drives.
The New York-based Human Rights Foundation collaborated with Forum 280 and USB Memory Direct to launch the "Flash Drives for Freedom" program.[80][81] The program was created in 2016 to smuggle flash drives with American and South Korean movies and television shows, as well as a copy of the Korean Wikipedia, into North Korea to spread pro-Western sentiment.[82][83]
Hardware designers later developed EEPROMs with the erasure region broken up into smaller "fields" that could be erased individually without affecting the others. Altering the contents of a particular memory location involved copying the entire field into an off-chip buffer memory, erasing the field, modifying the data as required in the buffer, and re-writing it into the same field. This required considerable computer support, and PC-based EEPROM flash memory systems often carried their own dedicated microprocessor system. Flash drives are more or less a miniaturized version of this.

In a typical well-conducted review of a number of high-performance USB 3.0 drives, a drive that could read large files at 68 MB/s and write at 46 MB/s, could only manage 14 MB/s and 0.3 MB/s with many small files. When combining streaming reads and writes the speed of another drive, that could read at 92 MB/s and write at 70 MB/s, was 8 MB/s. These differences differ radically from one drive to another; some drives could write small files at over 10% of the speed for large ones. The examples given are chosen to illustrate extremes....′[46]
Unlike solid-state memory, hard drives are susceptible to damage by shock (e.g., a short fall) and vibration, have limitations on use at high altitude, and although they are shielded by their casings, they are vulnerable when exposed to strong magnetic fields. In terms of overall mass, hard drives are usually larger and heavier than flash drives; however, hard disks sometimes weigh less per unit of storage. Like flash drives, hard disks also suffer from file fragmentation, which can reduce access speed.
Flash memory combines a number of older technologies, with lower cost, lower power consumption and small size made possible by advances in microprocessor technology. The memory storage was based on earlier EPROM and EEPROM technologies. These had limited capacity, were slow for both reading and writing, required complex high-voltage drive circuitry, and could be re-written only after erasing the entire contents of the chip.
Many companies make small solid-state digital audio players, essentially producing flash drives with sound output and a simple user interface. Examples include the Creative MuVo, Philips GoGear and the first generation iPod shuffle. Some of these players are true USB flash drives as well as music players; others do not support general-purpose data storage. Other applications requiring storage, such as digital voice or sound recording, can also be combined with flash drive functionality.[57]

Flash memory combines a number of older technologies, with lower cost, lower power consumption and small size made possible by advances in microprocessor technology. The memory storage was based on earlier EPROM and EEPROM technologies. These had limited capacity, were slow for both reading and writing, required complex high-voltage drive circuitry, and could be re-written only after erasing the entire contents of the chip.
Capacity - More so than any other feature, capacity will drive the price of a flash drive up the most. So before you make a purchase, consider how much you’re willing to spend on a flash drive and weigh that against how much capacity you’ll likely need. A flash drive with 16GB can cost you as little as $10, while a 128GB one will run up to $60 or more.
Flash drives are also cost-effective. You can securely store a few dozen gigabytes of data for less than $30, and these devices range in storage capacity, price and overall size - equal to the amount you're willing to invest. Some even have special features like lanyards, locks, belt clips and key fobs to make them easier to carry and keep track of.
There's a lot to choose from when it comes to buying a flash drive. The most important thing to consider is size. The whole point of a USB drive is to store lots of data in a small space, so think about what kinds of files you'll want to house on your flash drive. Movies and music take quite a bit of space, so if you're carrying your whole entertainment library with you, you'll want a big thumb drive – at least 16GB. Books and other text-based documents require relatively little storage space, so people like students and working professionals using Microsoft Office would be happy transferring Word documents or Excel files with as little as 1GB of space. On the other hand, if you are using photo or music editing software, you'll want a USB flash drive with lots of storage capacity to transfer graphic and music files.
×