^{Flash drives are often measured by the rate at which they transfer data. Transfer rates may be given in megabytes per second (MB/s), megabits per second (Mbit/s), or in optical drive multipliers such as "180X" (180 times 150 KiB/s).[19] File transfer rates vary considerably among devices. Second generation flash drives have claimed to read at up to 30 MB/s and write at about half that rate, which was about 20 times faster than the theoretical transfer rate achievable by the previous model, USB 1.1, which is limited to 12 Mbit/s (1.5 MB/s) with accounted overhead.[20] The effective transfer rate of a device is significantly affected by the data access pattern.[21]}
To ensure this information isn't stolen as well, having a locked flash drive can keep anyone from viewing your files should the drive fall into the wrong hands. Tiny and portable, they easily slip into a pants or coat pocket, in a computer bag or purse, and come in a variety of shapes and sizes. External keypads add an additional level of security to portable memory, meaning a viewer must first input a numerical code to gain access to files. These in turn can be encrypted and password protected, deterring serious threats to personal security.
Specially manufactured flash drives are available that have a tough rubber or metal casing designed to be waterproof and virtually "unbreakable". These flash drives retain their memory after being submerged in water, and even through a machine wash. Leaving such a flash drive out to dry completely before allowing current to run through it has been known to result in a working drive with no future problems. Channel Five's Gadget Show cooked one of these flash drives with propane, froze it with dry ice, submerged it in various acidic liquids, ran over it with a jeep and fired it against a wall with a mortar. A company specializing in recovering lost data from computer drives managed to recover all the data on the drive.[64] All data on the other removable storage devices tested, using optical or magnetic technologies, were destroyed.
USB flash drives are often used for storage, data back-up and transfer of computer files. Compared with floppy disks or CDs, they are smaller, faster, have significantly more capacity, and are more durable due to a lack of moving parts. Additionally, they are immune to electromagnetic interference (unlike floppy disks), and are unharmed by surface scratches (unlike CDs). Until about 2005, most desktop and laptop computers were supplied with floppy disk drives in addition to USB ports, but floppy disk drives became obsolete after widespread adoption of USB ports and the larger USB drive capacity compared to the 1.44 MB 3.5-inch floppy disk.
In a typical well-conducted review of a number of high-performance USB 3.0 drives, a drive that could read large files at 68 MB/s and write at 46 MB/s, could only manage 14 MB/s and 0.3 MB/s with many small files. When combining streaming reads and writes the speed of another drive, that could read at 92 MB/s and write at 70 MB/s, was 8 MB/s. These differences differ radically from one drive to another; some drives could write small files at over 10% of the speed for large ones. The examples given are chosen to illustrate extremes....′[46]
A flash drive consists of a small printed circuit board carrying the circuit elements and a USB connector, insulated electrically and protected inside a plastic, metal, or rubberized case, which can be carried in a pocket or on a key chain, for example. The USB connector may be protected by a removable cap or by retracting into the body of the drive, although it is not likely to be damaged if unprotected. Most flash drives use a standard type-A USB connection allowing connection with a port on a personal computer, but drives for other interfaces also exist. USB flash drives draw power from the computer via the USB connection. Some devices combine the functionality of a portable media player with USB flash storage; they require a battery only when used to play music on the go.

There are 2 ways; which one depends on how many USB ports you have. If you have 2, then put both flash drives in, open up in the file browser and move the information between the two drives in the file browser. If there is only one socket, put the first flash drive in and place the files to be transferred on the computer, then unlpug and put the next drive in. If you have no USB ports, you will need an adapter (Mac). You could also transfer files to the Cloud, then download them onto the other flash drive.

This USB 3.0 drive offers what the company is calling business-grade security with 256-bit AES hardware-based encryption. You can also choose a stepped up “managed” version that offers a more complete set of management tools using SafeConsole as support. Finally, there’s an anti-virus version that loads in ESET antivirus software out of the box to avoid trojan horses and other hacker tracking programs. All of the models are TAA-compliant, so this drive won’t be in breach of government regulations, and that USB 3.0 means that you’ll have nearly the fastest transfer speeds possible. You can pick it up in sizes ranging from 4GB to 64GB.
USB flash drives use the USB mass storage device class standard, supported natively by modern operating systems such as Windows, Linux, macOS and other Unix-like systems, as well as many BIOS boot ROMs. USB drives with USB 2.0 support can store more data and transfer faster than much larger optical disc drives like CD-RW or DVD-RW drives and can be read by many other systems such as the Xbox One, PlayStation 4, DVD players, automobile entertainment systems, and in a number of handheld devices such as smartphones and tablet computers, though the electronically similar SD card is better suited for those devices.
Flash memory combines a number of older technologies, with lower cost, lower power consumption and small size made possible by advances in microprocessor technology. The memory storage was based on earlier EPROM and EEPROM technologies. These had limited capacity, were slow for both reading and writing, required complex high-voltage drive circuitry, and could be re-written only after erasing the entire contents of the chip.

Features: 100% New&High Quality Storage Capacity: 32GB Support USB version 3.0 and 3.1 Easy plug and play installation Interface: USB 3.0; Capacity: 32GB Due to the inner system and procedure data will occupy some space and the real capacity will reduce lightly Stylish lightweight; portable,new concept modeling,classic fashion,compact Brisk High Speed; plug and play, in line with USB 3.0 specification, data transfer speed. Compatible with Windows 7/Windows 8, Windows XP, Windows Vista, Hi-Speed USB 3.0 port required for high speed transfer Support solution for Linux kernel version 2.4 or later version Driveless for OS 9X or up Durable solid-state storage No external power is required 4.5V ~ 5.5V from USB port The data read speed: 20MB-30MB/S（USB 3.0） The data write speed: 10MB-15MB/S（USB.

A recent development for the use of a USB Flash Drive as an application carrier is to carry the Computer Online Forensic Evidence Extractor (COFEE) application developed by Microsoft. COFEE is a set of applications designed to search for and extract digital evidence on computers confiscated from suspects.[48] Forensic software is required not to alter, in any way, the information stored on the computer being examined. Other forensic suites run from CD-ROM or DVD-ROM, but cannot store data on the media they are run from (although they can write to other attached devices, such as external drives or memory sticks).

There are 2 ways; which one depends on how many USB ports you have. If you have 2, then put both flash drives in, open up in the file browser and move the information between the two drives in the file browser. If there is only one socket, put the first flash drive in and place the files to be transferred on the computer, then unlpug and put the next drive in. If you have no USB ports, you will need an adapter (Mac). You could also transfer files to the Cloud, then download them onto the other flash drive.

Motherboard firmware (including BIOS and UEFI) can be updated using USB flash drives. Usually, new firmware image is downloaded and placed onto a FAT16- or FAT32-formatted USB flash drive connected to a system which is to be updated, and path to the new firmware image is selected within the update component of system's firmware.[49] Some motherboard manufacturers are also allowing such updates to be performed without the need for entering system's firmware update component, making it possible to easily recover systems with corrupted firmware.[50]
As highly portable media, USB flash drives are easily lost or stolen. All USB flash drives can have their contents encrypted using third-party disk encryption software, which can often be run directly from the USB drive without installation (for example, FreeOTFE), although some, such as BitLocker, require the user to have administrative rights on every computer it is run on.
Some manufacturers, aiming at a "best of both worlds" solution, have produced card readers that approach the size and form of USB flash drives (e.g., Kingston MobileLite,[65] SanDisk MobileMate[66]) These readers are limited to a specific subset of memory card formats (such as SD, microSD, or Memory Stick), and often completely enclose the card, offering durability and portability approaching, if not quite equal to, that of a flash drive. Although the combined cost of a mini-reader and a memory card is usually slightly higher than a USB flash drive of comparable capacity, the reader + card solution offers additional flexibility of use, and virtually "unlimited" capacity. The ubiquity of SD cards is such that, circa 2011, due to economies of scale, their price is now less than an equivalent-capacity USB flash drive, even with the added cost of a USB SD card reader.
These products use flash memory chips, a stable, high-density storage medium, to hold your data. They pack a huge amount of information into a compact form factor. Most thumb drives are less than 2 inches long and easily fit in a pocket, laptop bag or purse. Models with built-in covers protect physical connectors from damage, and select products feature rugged silicon and metal shells that enhance heat and water resistance.