Some organizations forbid the use of flash drives, and some computers are configured to disable the mounting of USB mass storage devices by users other than administrators; others use third-party software to control USB usage. The use of software allows the administrator to not only provide a USB lock but also control the use of CD-RW, SD cards and other memory devices. This enables companies with policies forbidding the use of USB flash drives in the workplace to enforce these policies. In a lower-tech security solution, some organizations disconnect USB ports inside the computer or fill the USB sockets with epoxy.
The memory in flash drives is commonly engineered with multi-level cell (MLC) based memory that is good for around 3,000-5,000 program-erase cycles,[40] but some flash drives have single-level cell (SLC) based memory that is good for around 100,000 writes. There is virtually no limit to the number of reads from such flash memory, so a well-worn USB drive may be write-protected to help ensure the life of individual cells.
Most USB flash drives weigh less than 30 g (1 oz).[31] While some manufacturers are competing for the smallest size[32] with the biggest memory,[33] some manufacturers differentiate their products by using elaborate housings, which are often bulky and make the drive difficult to connect to the USB port. Because the USB port connectors on a computer housing are often closely spaced, plugging a flash drive into a USB port may block an adjacent port. Such devices may carry the USB logo only if sold with a separate extension cable. Such cables are USB-compatible but do not conform to the USB standard.[34][35]
A flash drive consists of a small printed circuit board carrying the circuit elements and a USB connector, insulated electrically and protected inside a plastic, metal, or rubberized case, which can be carried in a pocket or on a key chain, for example. The USB connector may be protected by a removable cap or by retracting into the body of the drive, although it is not likely to be damaged if unprotected. Most flash drives use a standard type-A USB connection allowing connection with a port on a personal computer, but drives for other interfaces also exist. USB flash drives draw power from the computer via the USB connection. Some devices combine the functionality of a portable media player with USB flash storage; they require a battery only when used to play music on the go.
Digital audio files can be transported from one computer to another like any other file, and played on a compatible media player (with caveats for DRM-locked files). In addition, many home Hi-Fi and car stereo head units are now equipped with a USB port. This allows a USB flash drive containing media files in a variety of formats to be played directly on devices which support the format. Some LCD monitors for consumer HDTV viewing have a dedicated USB port through which music and video files can also be played without use of a personal computer.
USB 2.0 flash drives have a transfer rate of up to 480Mbps, while USB 3.0 flash drives allow for transfer rates 10 times faster — up to 4.8Gbps. However, you can only take advantage of this higher speed if your device has a USB 3.0 port. Although USB 3.0 flash drives and other devices are backwards compatible with USB 2.0 ports, they will only operate at a USB 2.0 rate.